中文简体If you want to change the way your refrigerator door opens, you'll need to replace the center section. That part is attached to the handle side of the frame and has two holes in it. The fridge door hinges are inserted into these holes.
Changing the way your fridge door opens is a relatively simple project. It requires a small flat screwdriver, a pair of torx screws and a bit of patience.
First, you'll need to remove the top hinge plate from the fridge. This is the section of the frame between the freezer and the fridge that holds the hinges.
Once that's removed, you can start working on the bottom part of the fridge. You'll need a small flat screwdriver to pry up the pivot pin bracket.
There are various ways to customize the metal bracket parts of your freezer, depending on what you need. Some are easy, while others require a lot of work and are more expensive to manufacture.
The easiest way to customize the bracket is by bending a sheet metal piece to an angle up to 120deg. This process is referred to as "sheet bending" or "sheet forming."
One way to add rigidity to the bracket is by adding a gusset. These are sewn in pieces that enlarge the shape of the bracket, or can be welded into it.
If you need to customize the bracket, make sure it's made from the right material. That's the best way to control costs and ensure that your bracket will last for years to come.
